IJET -Volume 5, Issue 1 , January - February 2019
|
S.No
|
Title/Author Name
|
Serial No
|
|
1 |
Innovative Mechanical Winder- Dirk Chadwick Mabasa, Peter John Mabelin, Jude Mavin Hidalgo, John Del Estay, Celil May R. Ylagan
Abstract
This project is a two-way powered mechanical winder using either hand-lever mechanism or a DC motor. The final prototype is capable of winding a single thread in 2-3 minutes using a 9V dc motor with a 6V adaptor, the speed is directly proportional with the dc motor’s voltage so the higher the voltage the faster it winds.It is mostly consist of recycled materials from scrap machine that made the prototype very cost efficient. The prototype can be innovated to become a universal mechanical winder by making the spool detachable to be able to change it with another one either a reel of wires, ropes or tapes. Keyword: Winder, DC Motor, Linkages, Gears, Bearings.× 
Dirk Chadwick Mabasa, Peter John Mabelin, Jude Mavin Hidalgo, John Del Estay, Celil May R. Ylagan"Innovative Mechanical Winder" Volume 5 - Issue 1 (1-4) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P1 |
|
2 |
Design Information System of Hospital Beds(SIMPATI RS) in Tangerang City- Yuliani, Romenah, Abdullah Wali
Abstract
This research is motivated by the importance of the information systems that can provide information availability Hospital beds are very beneficial to the general public, especially patients who are in need of any information Hospital in Tangerang are still available beds for hospitalization. Community or the patient could only know that information in a way to come directly to the destination hospital and asked to part Inpatient Unit, or via the telephone service to the Hospital which will be answered by officers Inpatient Unit. If the distance of the patient to the hospital was far away, it could be after the patient arrived at the hospital, which originally contained information for inpatient beds that are still empty are occupied. Thus the information obtained is not accurate and relevant. The purpose of this study is to design a system that can provide fast, accurate and relevant and accessible online anytime and anywhere by the public regarding information Hospital beds in the city of Tangerang, especially inpatient class III. The method used is the method of data collection (by means of interviews, observation, and literature / literature review), SWOT analysis method, the method SDLC design, prototype method, and black box testing method for testing and coding using Code Igniter framework 2.0, jQuery, javascript and CSS to design the look that has been made in photoshop portable. This research resulted in the design of information systems Hospital beds that can provide accurate and relevant information as needed and have started to be implemented in Tangerang City Hospital. But the results are not real time because the response Hospital yet responsive to input patient data when there is incoming and out of the unit at the Hospital Inpatient Such. Keyword: Design, Information systems, Hospital beds, Inpatient.×
Yuliani, Romenah, Abdullah Wali"Design Information System of Hospital Beds(SIMPATI RS) in Tangerang City" Volume 5 - Issue 1 (5-12) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P2 |
|
3 |
Analysis of Suspended Vibrated Drum, Part Ι : Modelling with Full Plane for Drum Vibration- Dhurgham Ahmed Kadhim, Hussain Abdulaziz Abrahem, Nazhat Saeed Abdulrazaq
Abstract
In this study, vibration characteristics of centrifuge machine with its suspension system were investigated through a developed mathematical model with three degrees of freedom (two displacements in a plane and other plane rotation) for the suspended vibrated drum. Numerically the dynamic model solved by Simulink/Matlab. In order to obtain the vibration characteristics of high speed excitation as well as valid the mathematical model, the system was implemented in real. To compare simulated and experimental results of the displacements and angle of the vibration then microcontroller (Arduino Nano) with motion sensor MPU6050 was used. The experimental data of linear vibration is acceleration, therefore to find experimental displacements; two integrations (trapezoidal approximation) were done with a filter before integration. Keyword: Dynamic model, Vibration, Suspended drum, Degree of freedom.×
Dhurgham Ahmed Kadhim, Hussain Abdulaziz Abrahem, Nazhat Saeed Abdulrazaq"Analysis of Suspended Vibrated Drum, Part Ι : Modelling with Full Plane for Drum Vibration" Volume 5 - Issue 1 (13-24) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P3 |
|
4 |
Automatic Visual Inspection for Silica Caps- Ahmed Osama, Alaa Hamdy, Sameh Salem
Abstract
In this paper, an automatic visual inspection system for checking silica caps is proposed. The proposed system is able to inspect silica cap and detect outer ring and inner cap defects. This variability is managed in an automatic way by means of using reject piston to automatically reject defects. Furthermore, the system is coupled to install the product on a conveyor to achieve inspection process without affecting the production act time. To achieve a robust inspection process, two algorithms are introduced; the first is a segmentation algorithm for extracting outer ring from images, while second is a recognition algorithm for inner cap inspection. Experimental results on different lots of real production show the robustness and reliability of the proposed in inspecting the silica caps. Keyword: inspection for silica caps Automated.×
Ahmed Osama, Alaa Hamdy, Sameh Salem"Automatic Visual Inspection for Silica Caps" Volume 5 - Issue 1 (25-32) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P4 |
|
5 |
Mechanical Engineering in Ancient Egypt, Part 80: Rock Inscriptions- Galal Ali Hassaan
Abstract
This paper is the 80th research paper in a series investigating the evolution of mechanical engineering in ancient Egypt. It investigates the inscriptions of rock during a time span from Naqada II to Late Periods of ancient Egypt. It outlines how the ancient Egyptians inscribed rock in deserts with scenes and texts. The script location, type of script used , the inscription type and the carved surfaces were all investigated.. Keyword: Mechanical engineering; ancient Egypt; rock inscriptions, Naqada II to Late Periods.×
Galal Ali Hassaan"Mechanical Engineering in Ancient Egypt, Part 80: Rock Inscriptions" Volume 5 - Issue 1 (33-43) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P5 |
|
6 |
Analysis of Water Observation Using Ardiuno Based on GSM and Wireless Detector Technology- Ramesh S
Abstract
The idea of ‘Wireless Detector Network’ (WDN) is the basic building block of a water monitoring and observation using wireless detector network (WDN) technology. To monitor water quality over different sites as a real-time application, an excellent system.The water observation and system is an open source software and hardware based on arduino technology.The Flow Of Water In The Pipes Is Been Sensed By Using Flow Sensor And Controlled By Arduino.In This Arduino Controller we Can Sense the Water Flowing And Also we can Get An Aware About Water Management based on technology.GSM which we can able to know the water supply to your area/home is initiated. The advantages such as, low power consumption, more flexible to deploy at remote sites and so on. This project is implemented using Arduino micro controller. Keyword: Wireless detector network, water observation, GSM module, Arduino controller.×
Ramesh S"Analysis of Water Observation Using Ardiuno Based on GSM and Wireless Detector Technology" Volume 5 - Issue 1 (44-51) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P5 |
|
7 |
FPGA Implementation of Efficient Advance Encryption Standard (AES) With Key Expansion Technique- Ramesh S
Abstract
The paper presents an efficient reconfigurable hardware implementation of Advance Encryption Standard (AES) algorithm on Field Programmable Gate Array (FPGA); using High Level Language (HLL) approach with less hardware resources. The FPGA platform used for AES implementation is Xilinx Atlys Virtex-6. Time-to-market is one of the key factors for any design in FPGA and digital system designing industry. This time can be reduced considerably with HLL approach. The presented algorithm is designed on a HLL tool, namely Xilinx system generator. It is very user friendly despite giving detailed control in designing the required system design. For actual testing and hardware implementation of the algorithm, the HLL-tool generates a bit file that can be directly burnt on the FPGA. To get the implementation of design on hardware, the presented work uses a similar approach to directly map the System Generator described design on FPGA. The presented work emphasizes on optimization for less hardware utilization. The presented design uses approximately just one thousand slices and about half a century of BRAMs. Keyword: AES; System Generator; FPGA; reconfigurable computing; HLL.×
Ramesh S"FPGA Implementation of Efficient Advance Encryption Standard (AES) With Key Expansion Technique" Volume 5 - Issue 1 (52-61) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P7 |
|
8 |
Dwelling Time Prediction Uses Back Propagation Algorithm at Soekarno-Hatta International Airport- Bayu Setiawan, Ratna Kusumawardani
Abstract
Indonesia is one of the countries that has become a market for international trade. The large number of domestic needs and the presence of e-commerce are the causes of the increasing growth of goods imports in Indonesia, which has triggered dwelling time in air transport. Dwelling time is the length of time calculated from the time the goods are unloaded from the ship to the goods out of the port. Problems that occur are difficulties in predicting dwelling time in air transport and the lack of application integration that can be used to make dwelling time predictions on Freight Forwarding companies. This study aims to predict the dwelling time of Freight Forwarding companies at the Soekarno-Hatta Airport Cargo Terminal using the Neural Network method with the Backpropagation algorithm. Researchers want to build models and applications and test the accuracy of predictive accuracy. In this study the highest accuracy was in the prediction in the yellow lane of 67% while the lowest accuracy was in the prediction on the red lane 31%. So that it can be said that backpropagation does not have high accuracy in dwelling time predictions. Keyword: Backpropagation, Dwelling Time, Freight Forwarding, Import, Prediction.×
Bayu Setiawan, Ratna Kusumawardani"Dwelling Time Prediction Uses Back Propagation Algorithm at Soekarno-Hatta International Airport" Volume 5 - Issue 1 (62-68) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P8 |
|
9 |
Modelling and Simulation of Water Level Control
in The Tank with The Cascade Control System- Iwan Rohman Setiawan
Abstract
Simulators for measurement and control systems in the process industry have been made at the Research Center for Calibration, Instrumentation and Metrology, Indonesian Institute of Sciences. In this paper, simulate water level control in the tank with a cascade control system using simulink. By first making mathematical modelling for the components and instruments used in the simulator. For water flow rate measurement modelling using orifice plates and differential pressure transmitters, the gain obtained is 50508. The simulation results show that at water level control using a cascade control system, the change in water flow rate of 1 liter/minute to the tank does not affect the water level in the tank, or the water level in the tank remains stable. Keyword: Mathematical model, simulation, water level control in the tank, cascade control system, water level stable.×
Iwan Rohman Setiawan "Modelling and Simulation of Water Level Control in The Tank with The Cascade Control System" Volume 5 - Issue 1 (69-78) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P9 |
|
10 |
Design and Assembly Analysis of Piston, Connecting Rod & Crankshaft- Prasanna Nagasai Bellamkonda, Satish Kasagani, Srikanth Sudabathula
Abstract
The main function of the piston of an IC engine is to receive the impulse from the expanding gas and to transmit the energy to the crankshaft through the connecting rod. The piston must also disperse a large amount of heat from the combustion chamber to the cylinder walls. In this thesis is to Model & Assemble the Piston, Connecting Rod & Crankshaft for a 4-stroke air- cooled 150cc Engine by theoretical calculations & also to Compare the Structural Analysis & Modal Analysis on two different materials such as (Aluminum Alloy – Cast iron) for Piston,(Aluminum Alloy – Manganese steel)for Connecting Rod (Nickel Chromium steel – High carbon steel)for Crankshaft. Modeling, Assembly of Piston, Connecting rod and Crankshaft is done in Creo/Engineering software Analysis is done in ANSYS.Structural analysis is used to determine displacements & stresses under static. Modal Analysis is used to determine the Vibration characteristics(natural frequencies & mode shapes) of the three components. Thermal analysis is to determine the heat flux and temperature distribution. By comparing the displacement stress results,using Cast Iron for Piston, Manganese Steel for Connecting rod and High Carbon Steel for crankshaft is best combination for assembly. Keyword: Piston, Connecting rod and Crankshaft, Aluminum Alloy – Cast iron, Aluminum Alloy – Manganese steel, Nickel Chromium steel – High carbon steel, Creo/Engineering software, ANSYS.×
Prasanna Nagasai Bellamkonda, Satish Kasagani, Srikanth Sudabathula "Design and Assembly Analysis of Piston, Connecting Rod & Crankshaft" Volume 5 - Issue 1 (79-88) January - February 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P10 |
Go Top
Copyright © 2015 IJET- International Journal of Engineering and Techniques Published By International Research Group, All rights reserved
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)